Hipot and Insulation Resistance Tester Model: TOS9200

Hipot and Insulation Resistance Tester

高溫和絕緣電阻測試儀

Model : TOS9200

The Kikusui TOS9200

* Specification

Environment

Installation location Indoors at an altitude of up to 2000 m

Warranty range

Temperature 5 °C to 35 °C

Humidity 20 %rh to 80 %rh (No condensation)

Operating range

Temperature 0 °C to 40 °C

Humidity 20 %rh to 80 %rh (No condensation)

Storage range

Temperature -20 °C to 70 °C

Humidity 90 %rh or less (No condensation)

Power requirements

Nominal voltage range (Allowable voltage range) 100 V to 120 V AC / 200 V to 240 V AC (85 V to 130 V AC / 170 V to 250 V AC) Selectable

Power consumption

Using no load (READY) 100 VA or less

Using the rated load Maximum of 800 VA

Allowable frequency range 47 Hz to 63 Hz

Insulation resistance 30 MΩ or more (500 V DC) [between the AC LINE and chassis]

Withstanding voltage 1500 V AC, 1 minute [between the AC LINE and chassis]

Earth continuity 25 A AC/0.1 Ω or less

Electromagnetic compatibility (EMC) (*6)

Conforms to the requirements of the following directive and standard.

EMC Directive 2004/108/EC, EN 61326-1 (Class A), EN 55011 (Class A, Group 1), EN61000-3-2, EN61000-3-3

Under following conditions

1. Used test leadwire TL01-TOS which is supplied. 2. No discharge occurs at outside of the tester.

3. Used the shielded cable which length is less than three meters when the SIGNAL I/O is used.

Safety (*6,7) Conforms to the requirements of the following directive and standard.

Low Voltage Directive 2006/95/EC , EN 61010-1 (Class I , Pollution degree 2) Class I

Dimensions(maximum) 430[16.93 inch] (455[17.91 inch]) W × 132[5.20 inch] (150[5.91 inch]) H × 370[14.57 inch] (440[17.32 inch]) D mm

Weight Approx. 19 kg (Approx.41.89 lbs)